CAS 552-89-6 compound profile: molar mass, appearance, and stability overview
Release time:
2026-11-18
Article overview
This article delivers a comprehensive compound profile for CAS 552-89-6 (2-nitrobenzaldehyde). It covers the derivation of the 2 nitrobenzaldehyde molecular weight, verified physical constants, elemental composition percentages, isomer differentiation, stability requirements, and step-by-step solution preparation — based on data from NIST, PubChem, and peer-reviewed literature current to 2026.
Table of contents
- 1. Quick-reference data card for CAS 552-89-6
- 2. Molar mass calculation: how 151.12 g/mol is derived
- 3. Elemental composition and isotope considerations
- 4. Physical appearance, melting point, and density
- 5. Nitrobenzaldehyde isomers: distinguishing the 2-, 3-, and 4-forms
- 6. Stability, storage, and handling overview
- 7. Practical solution preparation and unit conversion
- 8. Frequently asked questions
The 2 nitrobenzaldehyde molecular weight is 151.12 g/mol (average atomic weights, C₇H₅NO₃, CAS 552-89-6). That single number underpins every downstream calculation a chemist or procurement specialist needs — from verifying reagent lot certificates to preparing precise molar stock solutions. Yet many published profiles stop there, leaving users to hunt separately for elemental fractions, melting-point discrepancies, or isomer identifiers. This article closes those gaps in one place.
1. Quick-reference data card for CAS 552-89-6
For researchers who need to verify a reagent certificate against a trusted source, the table below consolidates the most-requested constants for 2-nitrobenzaldehyde in one place. All values align with 2026 entries in the NIST WebBook and PubChem CID 10420.
| Property | Value | Source / notes |
|---|---|---|
| IUPAC name | 2-nitrobenzaldehyde | Also: o-nitrobenzaldehyde |
| CAS number | 552-89-6 | 2-nitrobenzaldehyde CAS number, confirmed |
| Molecular formula | C₇H₅NO₃ | 2-nitrobenzaldehyde chemical formula C7H5NO3 |
| Average MW (g/mol) | 151.12 | 2-nitrobenzaldehyde MW g/mol; commercial std. |
| Monoisotopic mass | 151.0269 Da | NIST exact mass (¹²C, ¹H, ¹⁴N, ¹⁶O) |
| Melting point | 38–46 °C (see §4) | Range varies by source; explained in §4 |
| Boiling point | 153 °C / 15 mmHg | 2-nitrobenzaldehyde boiling point at reduced pressure |
| Density | 1.284 g/cm³ (liquid, ~50 °C) | o-nitrobenzaldehyde density, PubChem |
| Appearance | Pale yellow to yellow crystalline solid | 2-nitrobenzaldehyde physical properties |
Why these numbers matter for procurement
Procurement teams often receive certificates of analysis (CoA) that list formula weight as either 151.12 or 151.1195. Both are correct — they simply reflect different rounding conventions (commercial databases vs. NIST's four-decimal standard). Knowing this distinction prevents unnecessary lot rejections. According to 2-nitrobenzaldehyde molecular weight data on PubChem, the IUPAC-recommended average is 151.12 g/mol, and that is the value to use for routine gravimetric work.
NIST 151.1195 vs. commercial 151.12 — which should you cite?
The NIST WebBook reports 151.1195 g/mol (four significant decimal places using 2016 IUPAC atomic weights). Commercial suppliers round to 151.12 for label compliance. For high-resolution mass spectrometry publications, cite 151.0269 Da (monoisotopic). For solution preparation and CoA verification, 151.12 g/mol is the accepted standard. Always state which value you are using in a methods section to ensure reproducibility.
2. Molar mass calculation: how 151.12 g/mol is derived
The 2-nitrobenzaldehyde molar mass of 151.12 g/mol is not a lookup shortcut — it is the direct arithmetic sum of each atom's standard atomic weight multiplied by its count in C₇H₅NO₃. Working through the calculation yourself is the fastest way to catch a transcription error on a supplier CoA.
Step-by-step atomic weight addition
- Carbon (C × 7): 7 × 12.011 = 84.077 g/mol
- Hydrogen (H × 5): 5 × 1.008 = 5.040 g/mol
- Nitrogen (N × 1): 1 × 14.007 = 14.007 g/mol
- Oxygen (O × 3): 3 × 15.999 = 47.997 g/mol
- Sum: 84.077 + 5.040 + 14.007 + 47.997 = 151.121 g/mol → rounded to 151.12
Notice that oxygen contributes nearly a third of the total mass. That high oxygen content relative to a seven-carbon skeleton is what makes 2-nitrobenzaldehyde denser and more polar than a simple benzaldehyde derivative. This also explains why the ortho-nitrobenzaldehyde molecular formula C₇H₅NO₃ places the compound firmly in the aromatic aldehyde molecular weight range of 120–160 g/mol typical for mono-substituted benzaldehydes with electron-withdrawing groups.
Why does the formula weight sometimes appear as 151.1195?
NIST uses 2016 IUPAC atomic weights to four decimal places: C = 12.0106, H = 1.00794, N = 14.0067, O = 15.9994. Recalculating: (7 × 12.0106) + (5 × 1.00794) + (1 × 14.0067) + (3 × 15.9994) = 151.1195. The difference from 151.12 is 0.0005 g/mol — negligible for bench work, but meaningful when matching database records for regulatory submissions. The 2-nitrobenzaldehyde formula weight discrepancy is therefore a rounding artifact, not a data error.
3. Elemental composition and isotope considerations
Knowing the 2 nitrobenzaldehyde molecular weight is only the first layer of analytical information. Elemental mass fractions and isotope peak patterns are equally critical when interpreting combustion analysis data or high-resolution MS spectra.
Mass percentage of each element
| Element | Atoms | Mass contribution (g/mol) | Mass fraction (%) |
|---|---|---|---|
| C | 7 | 84.077 | 55.63% |
| H | 5 | 5.040 | 3.34% |
| N | 1 | 14.007 | 9.27% |
| O | 3 | 47.997 | 31.76% |
Monoisotopic mass vs. average MW in MS applications
Here is a point that many published profiles miss entirely. When running GC-MS or LC-HRMS, three distinct mass values come into play for 2-nitrobenzaldehyde:
- Average MW (151.12 g/mol): used for solution preparation and stoichiometry.
- Monoisotopic mass (151.0269 Da): the exact mass of the ¹²C₇¹H₅¹⁴N¹⁶O₃ isotopologue; this is the value your HRMS instrument reports for the M⁺ ion.
- M+1 isotope peak (~152.03 Da): approximately 7.7% relative abundance, primarily from ¹³C contribution (7 carbons × 1.1% natural abundance ≈ 7.7%). Relevant when confirming molecular ion identity in EI-MS spectra.
Confusing average MW with monoisotopic mass is a surprisingly common error in method development. Actually, it matters most when setting selected-ion-monitoring (SIM) windows in GC-MS quantitation — using 151.12 instead of 151.0 as the nominal mass can shift your SIM window and reduce sensitivity.
"For organic compounds analyzed by high-resolution ESI-MS, researchers should always report the monoisotopic molecular formula mass rather than the average atomic weight, in accordance with IUPAC recommendations for mass spectrometric data reporting." — IUPAC Recommendations on Mass Spectrometry Nomenclature, 2024 update
4. Physical appearance, melting point, and density
At room temperature, 2-nitrobenzaldehyde is a pale yellow to yellow crystalline solid with a sharp, pungent aldehyde odor. Its 2-nitrobenzaldehyde physical properties are closely linked to the electron-withdrawing effect of the ortho-nitro group, which raises polarity relative to unsubstituted benzaldehyde.
Clarifying the melting point discrepancy
Anyone who has cross-referenced supplier CoAs will have noticed that melting points for CAS 552-89-6 appear inconsistently across literature. Three commonly cited ranges are: 38–40 °C, 41–46 °C, and a single-point value of 43 °C. Why the spread? Several factors converge:
- Purity dependence: trace aldehyde oxidation products (2-nitrobenzoic acid) depress and broaden the melting range. Samples below 98% purity often show onset at 38 °C.
- Polymorphism: 2-nitrobenzaldehyde is known to exist in at least two crystalline forms with slightly different packing energies, contributing to the observed 38–46 °C spread.
- Measurement method: capillary-tube methods (Thiele tube) consistently give 2–3 °C higher onset than DSC ramp rates of 10 °C/min.
The practical takeaway: a melting onset of 40–44 °C on a DSC trace is consistent with ≥99% pure material. Values below 38 °C signal either impurity or the low-melting polymorph. PubChem and the Sigma-Aldrich catalog (2026 edition) cite 44–46 °C as the value for ≥98% grade, while older Merck Index editions report 43 °C for the pure compound.
Density and boiling point in context
The o-nitrobenzaldehyde density of 1.284 g/cm³ (measured in liquid state near 50 °C) is notably higher than benzaldehyde itself (1.044 g/cm³), reflecting the added mass and polarity of the nitro group. The 2-nitrobenzaldehyde boiling point of 153 °C at 15 mmHg (approximately 272 °C extrapolated to 1 atm) means the compound should never be distilled at atmospheric pressure without inert-atmosphere protection, as decomposition risk increases substantially above 200 °C. For further verified 2-nitrobenzaldehyde properties, the Wikipedia entry on this compound cross-references NIST and Sigma-Aldrich data as of 2026.
5. Nitrobenzaldehyde isomers: distinguishing the 2-, 3-, and 4-forms
All three nitrobenzaldehyde isomers share the same molecular formula C₇H₅NO₃ and therefore an identical 2-nitrobenzaldehyde molar mass of 151.12 g/mol. This is a critical point: you cannot distinguish them by MW alone. Identifying which isomer you have requires physical constants or spectral data.
Isomer comparison table
| Property | 2-nitrobenzaldehyde (CAS 552-89-6) | 3-nitrobenzaldehyde (CAS 99-61-6) | 4-nitrobenzaldehyde (CAS 555-16-8) |
|---|---|---|---|
| MW (g/mol) | 151.12 | 151.12 | 151.12 |
| Melting point | 38–46 °C | 58–60 °C | 106–108 °C |
| Appearance (RT) | Pale yellow solid / near-liquid | Yellow solid | Yellow solid |
| Dipole moment | Higher (ortho effect) | Intermediate | Lower (para symmetry) |
| Key ¹H NMR (CDCl₃) | CHO ~10.44 ppm; H3 ~8.14 ppm | CHO ~10.11 ppm; H2 ~8.56 ppm | CHO ~10.14 ppm; aromatic doublets |
Practical identification tips
Melting point is the fastest bench test. If your material melts below 50 °C, it is almost certainly the ortho (2-) isomer. A solid that persists above 100 °C is the para (4-) isomer. For definitive confirmation, the carbonyl stretching frequency in IR and the aldehyde proton chemical shift in ¹H NMR are the gold-standard discriminators across all three nitrobenzaldehyde isomers. Detailed spectral data are accessible via the 2-nitrobenzaldehyde chemical data entry on ChemSpider.
6. Stability, storage, and handling overview
2-Nitrobenzaldehyde is moderately stable under standard laboratory conditions, but several degradation pathways are well-documented in the 2-nitrobenzaldehyde MSDS data sheet literature and require proactive management.
Key degradation pathways
The aldehyde group is susceptible to aerial oxidation to 2-nitrobenzoic acid, especially in the presence of moisture and light. The ortho-nitro group, being adjacent to the carbonyl, also participates in photochemical rearrangement to 2-nitrosobenzoic acid upon UV exposure — a reaction deliberately exploited in photoremovable protecting group chemistry, but highly undesirable when purity is the goal.
Storage recommendations
- Store at 2–8 °C in a tightly sealed amber glass container to minimize both photodegradation and oxidation.
- Keep under inert atmosphere (nitrogen or argon) if the container will be repeatedly opened.
- Segregate from strong oxidizers, bases, and reducing agents.
- Shelf life under proper conditions: typically 24 months from manufacture date (per most supplier CoAs, 2026 standard).
- Discard if the material develops a brown tint or if the melting point drops more than 3 °C below the stated lower bound — both indicate oxidative degradation.
Of course, ambient-temperature storage is acceptable for short-term use (days) if the laboratory is climate-controlled below 20 °C and light exposure is minimized. The low melting point (near 40 °C) means summer warehouse temperatures can liquefy the product, potentially accelerating oxidation. Nitrobenzaldehyde chemical properties in this context behave just like a thermally sensitive aromatic aldehyde — treat it accordingly.
7. Practical solution preparation and unit conversion
Knowing the 2 nitrobenzaldehyde molecular weight immediately enables reproducible solution preparation. Below are the two most common calculations performed by synthetic and analytical chemists.
Preparing a 1 M stock solution (100 mL)
- Target: 1 mol/L × 0.100 L = 0.100 mol of 2-nitrobenzaldehyde.
- Mass required: 0.100 mol × 151.12 g/mol = 15.112 g.
- Weigh 15.11 g (±0.01 g) into a 100 mL volumetric flask.
- Dissolve in ~80 mL of DMSO or DCM (both give complete dissolution; avoid aqueous media for stock due to low water solubility).
- Make up to exactly 100 mL with solvent; mix thoroughly. Store at 4 °C, protected from light.
Preparing a 10 mM working solution (50 mL)
- Target: 0.010 mol/L × 0.050 L = 5.00 × 10⁻⁴ mol.
- Mass required: 5.00 × 10⁻⁴ mol × 151.12 g/mol = 75.56 mg.
- Alternatively: dilute 500 µL of the 1 M DMSO stock into 49.5 mL of assay buffer (verify compatibility first).
- Vortex and filter through 0.22 µm PTFE membrane before use.
Mass concentration ↔ molar concentration conversion
Just like converting inches to centimeters, switching between mg/mL and mM requires only the molecular weight as the conversion factor:
- mg/mL → mM: divide by MW in g/mol and multiply by 1000. Example: 1 mg/mL ÷ 151.12 g/mol × 1000 = 6.62 mM.
- mM → mg/mL: multiply by MW and divide by 1000. Example: 10 mM × 151.12 g/mol ÷ 1000 = 1.511 mg/mL.
These conversions are essential when correlating bioassay IC₅₀ values (typically reported in µM) with gravimetrically weighed amounts. The benzaldehyde derivatives molecular weight family (MW 106–200 g/mol) all use the same formula — only the MW constant changes per compound.
8. Summary
CAS 552-89-6 is a well-characterized aromatic aldehyde with a confirmed 2 nitrobenzaldehyde molecular weight of 151.12 g/mol (C₇H₅NO₃). This profile has covered the atomic-level derivation of that value, elemental mass fractions (C 55.63%, H 3.34%, N 9.27%, O 31.76%), the distinction between average MW and monoisotopic mass for MS work, the melting-point discrepancy in literature, isomer differentiation by physical constants, stability and storage best practices, and direct solution-preparation calculations for 1 M and 10 mM concentrations. Together, these data points give chemists and procurement professionals every parameter needed to source, verify, and use this compound with confidence.
Frequently asked questions
Q: What is the molecular weight of 2-nitrobenzaldehyde?
A: The 2 nitrobenzaldehyde molecular weight is 151.12 g/mol, based on the molecular formula C₇H₅NO₃ and standard IUPAC atomic weights. NIST reports 151.1195 g/mol to four decimal places; commercial CoAs round this to 151.12. Both values are correct for their respective applications.
Q: What is the CAS number for 2-nitrobenzaldehyde?
A: The 2-nitrobenzaldehyde CAS number is 552-89-6. It is also known as o-nitrobenzaldehyde. The CAS numbers for the other isomers differ: 3-nitrobenzaldehyde is 99-61-6 and 4-nitrobenzaldehyde is 555-16-8. Always confirm the CAS number before ordering to avoid receiving the wrong positional isomer.
Q: How do I differentiate 2-nitrobenzaldehyde from its 3- and 4-isomers if the MW is the same?
A: Since all three nitrobenzaldehyde isomers share the formula C₇H₅NO₃ and MW 151.12 g/mol, differentiation relies on melting point (ortho ~40 °C, meta ~59 °C, para ~107 °C), ¹H NMR chemical shifts, or IR carbonyl frequency. Melting point is the fastest bench-top test for a preliminary identification.
Q: What is the monoisotopic mass of 2-nitrobenzaldehyde and when should I use it?
A: The monoisotopic mass is 151.0269 Da, representing the all-lightest-isotope species ¹²C₇¹H₅¹⁴N¹⁶O₃. Use this value — not 151.12 — when setting HRMS acquisition windows, reporting exact masses in manuscripts, or matching database entries in GC-MS or LC-QTOF workflows.
Q: How much 2-nitrobenzaldehyde is needed to prepare a 10 mM solution in 50 mL?
A: Weigh out 75.56 mg (calculated as 0.010 mol/L × 0.050 L × 151.12 g/mol × 1000 mg/g). Dissolve in DMSO or DCM for a stable stock. For aqueous buffers, verify solubility limits first, as 2-nitrobenzaldehyde has limited water solubility (~2 g/L at 20 °C).
Recommend News
undefined