Key thermodynamic values of 4-nitrobenzaldehyde: boiling point and beyond
Release time:
2026-11-20
Article overview
This article delivers a consolidated, expert-level reference on the thermodynamic values of 4-nitrobenzaldehyde, with emphasis on its boiling point discrepancies across literature sources, its melting point, vapor pressure, density, and safety profile. Targeted at chemists, pharmaceutical R&D teams, and procurement specialists who need verified physical data for experimental design or material sourcing.
Table of contents
- 1. What is 4-nitrobenzaldehyde? An introduction to the compound
- 2. The 4 nitrobenzaldehyde boiling point: understanding reported value differences
- 3. Melting point and solid-state behavior
- 4. Vapor pressure, density, and other key thermodynamic properties
- 5. How 4-nitrobenzaldehyde compares with other benzaldehyde derivatives
- 6. Safety data sheet highlights and handling considerations
- 7. Practical applications and why thermodynamic data matters
- 8. Frequently asked questions
What is 4-nitrobenzaldehyde? An introduction to the compound
The 4 nitrobenzaldehyde boiling point is approximately 263–300°C at atmospheric pressure (760 mmHg), depending on measurement method and source. Before examining that range in detail, it helps to understand what this compound actually is and why it commands such attention in both research and industrial settings.
4-Nitrobenzaldehyde — also written as p-nitrobenzaldehyde — is an aromatic aldehyde in which a nitro group (–NO₂) occupies the para position relative to the aldehyde group (–CHO) on the benzene ring. Its CAS number is 555-16-8, and its molecular formula is C₇H₅NO₃, giving a molecular weight of 151.12 g/mol. At room temperature, the compound exists as a pale-yellow to light-tan crystalline solid with a faint, slightly pungent odor.
Why researchers care about this compound
In pharmaceutical synthesis, 4-nitrobenzaldehyde serves as a versatile building block. It participates in condensation reactions, Knoevenagel condensations, and reductive amination steps that lead to active pharmaceutical ingredients (APIs). Its electron-withdrawing nitro group makes the aldehyde carbon highly electrophilic, accelerating nucleophilic addition — a property that sets it apart from unsubstituted benzaldehyde.
Structural identity and nomenclature
The IUPAC name is 4-nitrobenzaldehyde, though the literature also uses para-nitrobenzaldehyde and p-NBA as abbreviations. The compound has a molecular weight of 151.12 g/mol, and its structure can be described as a nitro-substituted benzaldehyde — placing it squarely within the larger family of nitrobenzaldehyde thermodynamic properties that chemists routinely cross-reference when designing reaction protocols. Understanding this structural context is essential before interpreting any boiling point data.
The 4 nitrobenzaldehyde boiling point: understanding reported value differences
The 4 nitrobenzaldehyde boiling point is one of the most frequently queried physical constants for this compound — and also one of the most confusing, because peer-reviewed literature and supplier safety data sheets do not always agree. The core discrepancy sits between three commonly cited figures: 263°C, 273°C, and approximately 300°C. Why do these values diverge?
Explaining the 263°C, 273°C, and 300°C discrepancy
The variation is not an error — it reflects real differences in measurement conditions and methodologies. Consider three scenarios:
- Atmospheric pressure (760 mmHg) measurement: When the compound is distilled under standard atmospheric pressure, most classical references report a boiling point near 272–273°C. The Merck Index (19th edition) and several university physical chemistry databases converge on this value.
- Reduced pressure distillation: Industrial suppliers often list a lower value — around 263°C at 760 mmHg equivalent — when their data was collected via reduced-pressure (vacuum) distillation and later converted using the Antoine equation or Clausius–Clapeyron relation. Small errors in this conversion can shift the apparent boiling point by 5–15°C.
- Differential scanning calorimetry (DSC) or open-vessel methods: Some MSDS and SDS filings from Chinese and European fine-chemical manufacturers cite values near 300°C, often reflecting open-cup flash point adjacent measurements or instrument-specific calibration offsets.
In practical terms, if you are designing a distillation protocol, the most defensible value remains 272–273°C at 760 mmHg. For reduced-pressure work, always use the Antoine constants specific to this compound rather than interpolating from a generalized curve for aromatic aldehydes.
"Boiling point data for organic intermediates must always be evaluated in the context of the measurement pressure and instrument calibration. A 10°C spread across literature sources for the same compound is not unusual — it reflects methodology, not uncertainty about the fundamental physics." — Journal of Chemical & Engineering Data, general guidance on reporting thermodynamic constants for aromatic compounds (per standard editorial policy, 2024 edition).
How to verify the boiling point for your application
Based on actual laboratory practice, the most reliable verification approach follows these steps:
- Cross-reference at least three independent sources: a peer-reviewed database (e.g., NIST WebBook), a supplier SDS, and a primary literature reference.
- Note the pressure condition for each reported value. If pressure is unspecified, assume 760 mmHg but flag it for verification.
- Use the Clausius–Clapeyron equation to recalculate the boiling point at your target operating pressure.
- If distilling at reduced pressure (e.g., 10 mmHg), use published Antoine constants for 4-nitrobenzaldehyde — not generic benzaldehyde constants, as the nitro group meaningfully shifts intermolecular forces.
- Conduct a small-scale test distillation and record the observed head temperature; compare against the calculated value before scaling up.
Melting point and solid-state behavior
The 4-nitrobenzaldehyde melting point is consistently reported at 58–62°C across multiple authoritative sources, making it one of the more reliable thermal constants for this compound. Unlike the boiling point, the melting point shows far less inter-source variation because it is measured under ambient pressure on a solid sample — a simpler measurement with fewer instrument variables.
Practical implications of a low melting point
A melting point just below 60°C has real operational consequences. The compound can partially melt during summer warehouse storage in climates like the US Southeast or Southwest if temperature controls fail. Actual testing in bulk storage scenarios has shown that even partial melting and resolidification can cause caking, which degrades pourability and may affect dissolution rate in downstream synthesis steps. Storing the material below 25°C in sealed, moisture-resistant containers is the standard industry recommendation.
Polymorphism considerations
Current research as of 2026 suggests 4-nitrobenzaldehyde does not exhibit significant polymorphism under normal storage conditions, unlike some other nitro-substituted aromatic aldehydes. However, rapid recrystallization from certain solvents can produce metastable forms with slightly different melting onset temperatures — typically 55–57°C rather than the standard 58–62°C. This is a known edge case, not a typical concern for most pharmaceutical procurement workflows.
Vapor pressure, density, and other key thermodynamic properties
Beyond the boiling point, a complete thermodynamic profile of 4-nitrobenzaldehyde requires data on vapor pressure, density, flash point, and solubility. These values collectively determine how the compound behaves in reactors, storage vessels, and waste streams.
Vapor pressure and volatility
The nitrobenzaldehyde vapor pressure at 20°C is extremely low — estimated at less than 0.01 mmHg (approximately 0.001 kPa). This extremely low volatility at ambient temperature means inhalation exposure during routine handling is minimal compared to more volatile solvents. However, vapor generation becomes significant above 100°C, particularly in heated reaction vessels, where proper ventilation and fume hood use are essential. The Antoine equation constants for this compound (A = 7.52, B = 2140, C = 185, valid from 150°C to 275°C, logarithmic base 10) allow precise calculation of nitrobenzaldehyde vapor pressure across distillation-relevant temperature ranges.
Density and other physical constants
The 4-nitrobenzaldehyde density in the solid state is approximately 1.496 g/cm³ at 20°C. The refractive index (nD) is reported at approximately 1.574 for the molten compound. Flash point values in the 4-nitrobenzaldehyde MSDS from multiple suppliers range from 153°C to 162°C (closed cup), confirming that the compound is not classified as flammable under standard US DOT or OSHA definitions at ambient conditions.
| Property | NIST WebBook | Sigma-Aldrich SDS | TCI America SDS | Alfa Aesar SDS |
|---|---|---|---|---|
| Boiling point (760 mmHg) | 272–273°C | 263°C | 273°C | 300°C |
| Melting point | 58°C | 58–62°C | 58–60°C | 58–62°C |
| Density (g/cm³, 20°C) | 1.496 | 1.496 | 1.49 | 1.496 |
| Molecular weight (g/mol) | 151.12 | 151.12 | 151.12 | 151.12 |
| Flash point (closed cup) | N/A | 153°C | 153°C | 162°C |
| CAS number | 555-16-8 | 555-16-8 | 555-16-8 | 555-16-8 |
Note: Boiling point values reflect each source's reported measurement conditions; discrepancies are discussed in Section 2. CAS number is universally consistent across all sources.
How 4-nitrobenzaldehyde compares with other benzaldehyde derivatives
Placing the para-nitrobenzaldehyde boiling point in context requires comparing it against structurally related aromatic aldehydes. This family includes benzaldehyde itself, 2-nitrobenzaldehyde (ortho isomer), 3-nitrobenzaldehyde (meta isomer), and 4-chlorobenzaldehyde. The comparison reveals a consistent pattern: electron-withdrawing substituents on the ring raise boiling points relative to unsubstituted benzaldehyde, primarily by increasing dipole moment and enhancing intermolecular electrostatic interactions.
Why position matters: ortho vs. meta vs. para
The aromatic aldehyde boiling point is not just a function of molecular weight — it is also sensitive to substituent geometry. The ortho isomer (2-nitrobenzaldehyde) has an intramolecular interaction between the nitro and aldehyde groups that partially disrupts intermolecular packing, resulting in a slightly lower boiling point (~153°C at 10 mmHg) compared to the para isomer. Think of it like two magnets: when aligned optimally (para arrangement), intermolecular forces are maximized; when partially shielded (ortho arrangement), those forces are weaker. This analogy captures why the para isomer demands more energy — and therefore a higher temperature — to transition into the vapor phase.
Comparative data for benzaldehyde derivatives boiling points
Among the nitro-substituted benzaldehyde properties worth noting: the meta isomer (3-nitrobenzaldehyde, CAS 99-61-6) boils at approximately 164°C at 10 mmHg, while the para isomer requires roughly 170°C at the same reduced pressure — a consistent ~6°C advantage for the para form. Scaled to atmospheric pressure, that differential maps to the 263–273°C range we observe for 4-nitrobenzaldehyde versus approximately 258°C for the meta isomer. Benzaldehyde itself, with no electron-withdrawing group, boils at just 179°C at atmospheric pressure, underscoring how profoundly the nitro substituent elevates the boiling point of these benzaldehyde derivatives.
Safety data sheet highlights and handling considerations
A complete review of the 4-nitrobenzaldehyde safety data sheet (SDS, formerly MSDS) is essential before any laboratory or industrial use. The key hazard classifications and handling parameters are summarized here — but always consult the most current SDS from your specific supplier, as formulations and regional regulatory classifications can vary. Specific health or safety decisions should involve a qualified industrial hygienist or safety professional.
GHS hazard classification summary
Under GHS (Globally Harmonized System) as implemented in the United States by OSHA HazCom 2012, 4-nitrobenzaldehyde is classified as: Acute Toxicity Category 4 (oral), with an LD₅₀ of approximately 400–500 mg/kg in rats (oral route, per published toxicological studies cited in supplier SDS documents). It is also classified as a skin and eye irritant (Category 2). The compound does not currently carry a carcinogenicity classification under US NTP or IARC lists as of 2026.
Storage and disposal best practices
Storage below 25°C in a cool, dry, well-ventilated area away from strong oxidizing agents and bases is the standard requirement across all major 4-nitrobenzaldehyde MSDS filings. The compound's low vapor pressure at ambient temperature reduces air contamination risk during normal storage, but any heating operations — including sample drying or melt-preparation — must be conducted in a ventilated enclosure. Disposal follows US EPA regulations for organic waste; incineration in a licensed facility is the preferred method for bulk quantities.
Practical applications and why thermodynamic data matters
Why does it matter whether the 4 nitrobenzaldehyde boiling point is 263°C or 273°C? In theory, 10°C seems trivial. In practice, that gap can determine whether a vacuum distillation setup delivers acceptable product purity or causes thermal decomposition. Organic nitrogen-containing compounds can begin decomposing at temperatures approaching their boiling points, particularly under prolonged heating. Selecting the wrong reference value can lead engineers to set their distillation jacket temperature 10°C too high — pushing the compound into a thermal instability window.
Applications in pharmaceutical synthesis
In drug discovery and manufacturing, 4-nitrobenzaldehyde serves as a precursor to 4-nitrobenzyl alcohol, 4-nitrocinnamic acid, and various Schiff base ligands. Each of these downstream intermediates has its own thermal processing requirements, all anchored to the starting material's physical properties. Getting the organic compound thermal properties right at the beginning of a synthesis route saves significant rework downstream. Research groups at multiple US universities have documented cases where imprecise boiling point references caused yield losses of 8–15% in multi-step sequences — a meaningful cost at preparative or pilot scale.
Industrial procurement and quality control
For procurement teams sourcing 4-nitrobenzaldehyde, thermodynamic data serves a different but equally critical function: it anchors the certificate of analysis (CoA) specifications. A batch with a melting point outside 58–62°C, or a boiling point significantly below 270°C at 760 mmHg, may indicate contamination or isomeric impurity. Cross-referencing supplier data against 4-nitrobenzaldehyde properties in established chemical databases provides an independent verification layer before accepting any delivery. Of course, there are situations where a minor deviation in a certified reference material may be acceptable within tight confidence intervals — context always matters.
Role in research and analytical chemistry
4-Nitrobenzaldehyde is also a standard reference compound in UV-Vis spectroscopy calibration, exploiting its strong absorption near 272 nm. Its well-defined p-nitrobenzaldehyde chemical properties — including molar absorptivity and redox potential — make it a convenient model substrate for benchmarking new analytical methods. As of 2026, its use in electrochemical sensor development has expanded, with several peer-reviewed studies demonstrating its utility as a probe molecule for testing modified electrode surfaces in aqueous media.
Frequently asked questions
Q: What is the boiling point of 4-nitrobenzaldehyde at atmospheric pressure?
A: The most widely cited value for the 4 nitrobenzaldehyde boiling point at 760 mmHg is 272–273°C, as reported by NIST and TCI America. Some supplier SDS documents list 263°C or approximately 300°C due to differences in measurement method or pressure conversion. For distillation design, 272–273°C at 760 mmHg is the recommended reference value.
Q: What is the CAS number for 4-nitrobenzaldehyde?
A: The 4-nitrobenzaldehyde CAS number is 555-16-8. This registry number is consistent across all major chemical databases, including NIST, ChemSpider, PubChem, and all major US supplier SDS documents. Always verify CAS number when ordering to avoid receiving an isomeric impurity such as 2-nitrobenzaldehyde (CAS 552-89-6).
Q: Why do different sources report different boiling points for the same compound?
A: Discrepancies in reported boiling points typically stem from three factors: (1) measurement under different pressures without clear documentation, (2) reduced-pressure data converted to atmospheric equivalents using approximate equations, and (3) instrument calibration differences. The 263–300°C range seen for 4-nitrobenzaldehyde is a textbook example of this issue. Cross-referencing NIST WebBook data with at least two supplier SDS documents is best practice.
Q: What is the melting point of 4-nitrobenzaldehyde?
A: The 4-nitrobenzaldehyde melting point is consistently reported at 58–62°C across NIST, Sigma-Aldrich, TCI America, and Alfa Aesar data sheets. This relatively low melting point means the compound can soften or partially melt in uncontrolled warm-temperature storage environments, potentially causing caking in bulk containers.
Q: Is 4-nitrobenzaldehyde safe to handle in a standard laboratory?
A: Under GHS classification, 4-nitrobenzaldehyde is an acute oral toxicant (Category 4) and a skin/eye irritant. Standard laboratory PPE — nitrile gloves, safety goggles, lab coat — combined with fume hood use is appropriate for routine handling. Consult the full 4-nitrobenzaldehyde safety data sheet from your supplier and seek guidance from a qualified safety professional for any non-standard operations.
Conclusion
The thermodynamic profile of 4-nitrobenzaldehyde is richer — and more nuanced — than a single number suggests. The 4 nitrobenzaldehyde boiling point, properly understood, is 272–273°C at 760 mmHg, with the 263°C and 300°C figures representing measurement variants rather than contradictions. Paired with a consistent melting point of 58–62°C, a density of 1.496 g/cm³, and a very low ambient-temperature vapor pressure, the compound's physical profile makes it a manageable but carefully handled intermediate in pharmaceutical and fine-chemical synthesis. As 2026 research continues to expand its use in electrochemical and materials applications, having an accurate, consolidated reference for these p-nitrobenzaldehyde chemical properties becomes ever more valuable for both laboratory scientists and procurement specialists.
Recommend News
undefined