Understanding nitrobenzaldehyde isomers: ortho, meta, and para differences
Release time:
2026-11-10
Article overview
This guide compares 2-, 3-, and 4-nitrobenzaldehyde across CAS numbers, melting points, reactivity, synthesis, applications, safety data, quality control, and sourcing, helping researchers and buyers choose the correct isomer in 2026.
Table of contents
- 1. What nitrobenzaldehyde is and why the isomers matter
- 2. Physical properties and reactivity of the three isomers
- 3. Nitrobenzaldehyde synthesis, separation, and scale-up
- 4. Nitrobenzaldehyde uses: pharmaceuticals, dyes, and photochemistry
- 5. Safety, nitrobenzaldehyde SDS, and handling essentials
- 6. Characterization, quality control, and storage stability
- 7. How to buy nitrobenzaldehyde: grades, packaging, and 2026 supply trends
- 8. Frequently asked questions
Nitrobenzaldehyde is an aromatic aldehyde carrying one nitro group on the benzene ring. The ortho, meta, and para isomers share the formula C₇H₅NO₃ but behave like three different reagents: they melt at different temperatures, react at different speeds, and serve different industries. Ordering the wrong one is a costly mistake. This guide explains how the three forms differ, how each is made, where each is used, and what to check on the SDS before you buy nitrobenzaldehyde in 2026.
What nitrobenzaldehyde is and why the isomers matter
The three isomers differ only in where the nitro group sits relative to the aldehyde, yet that single change shifts melting point, reactivity, and end use. Treating them as one product is the fastest route to a failed batch.
Nitrobenzaldehyde refers to a benzaldehyde in which one ring hydrogen is replaced by a nitro group (–NO₂), giving the formula C₇H₅NO₃ and a molecular weight of 151.12 g/mol. Industry handles three positional isomers, each with its own registry entry and its own specification sheet.
Which nitrobenzaldehyde CAS number belongs to which isomer?
The nitrobenzaldehyde CAS number is isomer-specific. 2-nitrobenzaldehyde (o-nitrobenzaldehyde) is 552-89-6, 3-nitrobenzaldehyde (m-nitrobenzaldehyde) is 99-61-6, and 4-nitrobenzaldehyde (p-nitrobenzaldehyde) is 555-16-8. Halogenated relatives such as 4-chloro-3-nitrobenzaldehyde carry separate numbers. Always put the CAS number on the purchase order, because a request for plain "nitrobenzaldehyde" is ambiguous and invites substitution.
Why are the isomers not interchangeable?
Many buyers assume ortho, meta, and para forms can be swapped. They cannot. The nitro group strongly withdraws electrons, so its position changes how electron-poor the carbonyl carbon is, how the crystals pack, and how the molecule responds to light. It is like three keys cut from the same blank: identical metal, but only one opens a given lock. Of course, a rough screening experiment may tolerate any isomer, yet a defined target structure fixes the substitution pattern from the start. A frequent pain point for purchasing teams is simply an order placed against the wrong locant.
Which grades and derivatives are sold?
Commercial nitrobenzaldehyde is sold mainly by isomer and by purity, with 98% and 99% HPLC grades dominating catalogs. Halogenated derivatives such as 4-chloro-3-nitrobenzaldehyde extend the family for specialty synthesis. Each form is an aromatic aldehyde at heart, so aldehyde chemistry (oxidation, reduction, condensation) carries across, while the nitro group adds a second handle for reduction to the amine.
Physical properties and reactivity of the three isomers
4-nitrobenzaldehyde has the highest nitrobenzaldehyde melting point (about 103–106 °C) and the most electrophilic carbonyl. 3-nitrobenzaldehyde melts near 55–58 °C and reacts most slowly. 2-nitrobenzaldehyde melts lowest, around 42–44 °C, and is uniquely light-sensitive. The table lists typical catalog values; confirm them against your lot's certificate of analysis.
| Property | 2-nitrobenzaldehyde (ortho) | 3-nitrobenzaldehyde (meta) | 4-nitrobenzaldehyde (para) |
|---|---|---|---|
| CAS number | 552-89-6 | 99-61-6 | 555-16-8 |
| Molecular weight | 151.12 g/mol | 151.12 g/mol | 151.12 g/mol |
| Appearance | Pale yellow crystals | Pale yellow to light brown crystals | Pale yellow to yellow powder |
| Melting point (typical) | 42–44 °C | 55–58 °C | 103–106 °C |
| Water solubility | Poor | Poor | Poor |
| Good solvents | DMSO, ethanol, ethyl acetate | DMSO, ethanol, ethyl acetate | DMSO, ethanol, ethyl acetate |
| Carbonyl electrophilicity | Intermediate (steric effects) | Lowest | Highest |
| Nitro Hammett constant | Not applicable (steric) | σm = 0.71 | σp = 0.78 |
| Light sensitivity | High | Moderate | Moderate |
The melting point also affects handling. 2-nitrobenzaldehyde can soften or clump in a warm warehouse, while 4-nitrobenzaldehyde stays free-flowing. The reference entry for 2-nitrobenzaldehyde also describes how the ortho isomer rearranges under UV light, which explains its higher storage sensitivity.
Hammett substituent constants for the nitro group are σm = 0.71 and σp = 0.78 (Hansch, Leo, and Taft, Chemical Reviews, 1991). The larger para value is why the carbonyl in 4-nitrobenzaldehyde is more electrophilic than in the meta isomer.
Which isomer is most reactive toward nucleophiles?
The para isomer, followed by ortho and then meta. In aldol, Knoevenagel, Wittig, and imine-forming reactions, 4-nitrobenzaldehyde typically reacts fastest under matched conditions, while the 3-isomer is the most sluggish. The ortho isomer sits in between, but steric crowding and intramolecular interactions make its behavior less predictable. Why do some reaction screens still give surprising rankings? Solvent, catalyst, and temperature can narrow or even reverse small differences.
The practical consequence is timing. An imine condensation that finishes quickly with the 4-isomer may need longer reaction times or mild heating with the 3-isomer. Monitor by TLC or HPLC rather than copying a reaction time from a different isomer's procedure.
What solvents dissolve nitrobenzaldehyde?
All three isomers are poorly soluble in water but dissolve well in DMSO, DMF, ethanol, acetone, ethyl acetate, and dichloromethane. A frequent error is dropping the solid straight into an aqueous buffer. Dissolve it first in a small volume of DMSO or ethanol, then dilute slowly while watching for cloudiness.
Nitrobenzaldehyde synthesis, separation, and scale-up
Direct benzaldehyde nitration with mixed acid mainly gives 3-nitrobenzaldehyde, because the aldehyde group directs incoming electrophiles to the meta position. The ortho and para isomers are usually prepared from the matching nitrotoluenes instead.
How is 3-nitrobenzaldehyde made by benzaldehyde nitration?
Classical benzaldehyde nitration uses nitric and sulfuric acids at low temperature. The aldehyde is a deactivating meta director, so the nitronium ion attacks the meta position preferentially. The meta isomer is commonly cited at roughly three-quarters of the product mixture, with ortho as the main by-product and only a small para fraction. That regiochemistry is the textbook reason 3-nitrobenzaldehyde is the easiest isomer to access. The outline below summarizes a typical laboratory workflow; qualified chemists should follow a validated, hazard-reviewed procedure such as those published in Organic Syntheses.
- Cool concentrated sulfuric acid to 0–5 °C in a jacketed reactor.
- Add nitric acid slowly to form mixed acid, holding the temperature below about 10 °C.
- Dose benzaldehyde dropwise with vigorous stirring, keeping the exotherm controlled to limit oxidation to nitrobenzoic acid.
- Quench the mixture onto crushed ice and filter the crude solid.
- Wash with cold water and dilute sodium bicarbonate to remove residual acid.
- Recrystallize to remove the ortho isomer and reach the target purity.
How are 2- and 4-nitrobenzaldehyde produced?
4-nitrobenzaldehyde is typically made by oxidizing 4-nitrotoluene or 4-nitrobenzyl derivatives, often through an intermediate such as the diacetate. 2-nitrobenzaldehyde is likewise built from 2-nitrotoluene through side-chain functionalization and oxidation. The main by-product in every oxidation route is the corresponding nitrobenzoic acid, so temperature control, limited oxidant stoichiometry, and HPLC monitoring are the key levers for yield. Industrial yields are mostly proprietary, so be skeptical of any figure quoted without a source.
| Route | Starting material | Main product | Key by-product or control point |
|---|---|---|---|
| Benzaldehyde nitration | Benzaldehyde, HNO₃/H₂SO₄ | 3-nitrobenzaldehyde | 2-isomer; nitrobenzoic acid |
| Nitrotoluene oxidation (para) | 4-nitrotoluene | 4-nitrobenzaldehyde | 4-nitrobenzoic acid from over-oxidation |
| Nitrotoluene functionalization (ortho) | 2-nitrotoluene | 2-nitrobenzaldehyde | 2-nitrobenzoic acid; benzylic intermediates |
How do you separate and purify the isomers?
Fractional crystallization exploits the large melting-point gap: 4-nitrobenzaldehyde crystallizes readily, while the lower-melting 2-isomer tends to stay in the mother liquor. Vacuum distillation and column chromatography handle small batches. At scale, the real challenges are heat removal, nitrogen oxide off-gas, and spent-acid disposal. Scaling nitration is like steering a loaded truck downhill: starting is easy, controlling it is the job.
Nitrobenzaldehyde uses: pharmaceuticals, dyes, and photochemistry
The main nitrobenzaldehyde uses are as intermediates for pharmaceuticals (especially dihydropyridine calcium channel blockers), agrochemicals, dyes, and photochemical materials. Each isomer tends to serve a different niche, as the table shows.
| Isomer | Representative use | Key reaction |
|---|---|---|
| 2-nitrobenzaldehyde | Nifedipine intermediate; indigo; photolabile o-nitrobenzyl groups | Hantzsch synthesis; Baeyer–Drewsen condensation |
| 3-nitrobenzaldehyde | 3-nitrophenyl dihydropyridines such as nitrendipine; tipranavir-related routes reported | Hantzsch synthesis; nitro reduction |
| 4-nitrobenzaldehyde | Imine and chalcone building block; agrochemical intermediates | Condensation; reduction to 4-aminobenzaldehyde |
Which pharmaceutical intermediates start from nitrobenzaldehyde?
A well-known case is nifedipine, prepared by the Hantzsch reaction of 2-nitrobenzaldehyde with two equivalents of methyl acetoacetate and ammonia. Swap in 3-nitrobenzaldehyde and the same reaction architecture leads to 3-nitrophenyl dihydropyridines. Reported yields vary widely with solvent, temperature, and workup, so consult the original paper rather than assuming a single number. This is why pharmaceutical buyers insist on isomer purity: a few percent of the wrong isomer carries straight through into a regioisomeric impurity.
Why is 2-nitrobenzaldehyde important in photochemistry?
Under UV light, 2-nitrobenzaldehyde rearranges to 2-nitrosobenzoic acid, a clean reaction used for chemical actinometry. Its relative, the o-nitrobenzyl group, is among the best-known photolabile protecting groups. In 2026, growing interest in photoacid generators, photoresists, and UV dosimeters is pulling demand toward high-purity ortho material. History offers another case: in 1882 Baeyer and Drewsen made indigo by condensing 2-nitrobenzaldehyde with acetone under base, a reaction still taught in organic chemistry courses.
What other synthetic uses exist?
Beyond drugs, nitrobenzaldehyde uses include agrochemical intermediates, dye and pigment building blocks, and general organic synthesis. Reduction of the nitro group gives aminobenzaldehydes, and 2-aminobenzaldehyde generated in situ from the ortho isomer is a classic partner in Friedländer quinoline synthesis. Condensation with acetophenones gives nitro-chalcones, and Henry reactions with nitroalkanes give nitro-alcohols. Because the aldehyde and nitro groups can be addressed separately, the compound works as a two-handle building block.
Safety, nitrobenzaldehyde SDS, and handling essentials
Treat all three isomers as harmful if swallowed and irritating to skin, eyes, and airways until your supplier's nitrobenzaldehyde SDS says otherwise. Wear nitrile gloves, splash goggles, and a lab coat, and weigh powders inside a fume hood.
How should you read GHS hazard statements and LD50 data?
Typical classifications include H302 (harmful if swallowed), H315 (skin irritation), H319 (eye irritation), and H335 (respiratory irritation). Some suppliers add skin-sensitization or aquatic-toxicity statements. Classifications differ by isomer, supplier, and data set, so read Section 2 of the SDS you actually received. Oral LD50 values appear in Section 11 and vary by source and test species; do not copy a number from a blog post. The PubChem 4-nitrobenzaldehyde data page collects GHS entries and toxicity references with citations, which makes cross-checking easier. This article is not medical or regulatory advice; consult a qualified EHS professional for your site.
What PPE, spill, and first-aid steps apply?
- PPE: nitrile gloves, chemical splash goggles, lab coat, and a particulate respirator if dust escapes the hood.
- Spills: avoid raising dust, collect solid with a damp cloth or HEPA vacuum into a labeled container, ventilate the area, and keep material out of drains.
- Eyes and skin: rinse eyes with water for at least 15 minutes; wash skin with soap and water.
- Inhalation and ingestion: move to fresh air; rinse the mouth and call Poison Control (1-800-222-1222 in the US).
- Fire: use water spray, CO₂, or dry chemical; combustion can release nitrogen oxides.
Why do labs so often skip the incompatibility check? Nitroaromatics can decompose exothermically when heated in confinement, and strong bases, reducing agents, and oxidizers should stay well away from storage shelves. In well-run labs, the habit that prevents most incidents is simple: weigh in the hood, close the bottle immediately, and log the opening date.
How should waste and transport be handled?
Check Section 14 of the SDS for the transport classification of your specific isomer and package size, because rules differ by quantity and mode. Collect waste in labeled, compatible containers and send it to a licensed disposal contractor. Never pour solutions down the drain, since nitroaromatics may persist in the environment.
Characterization, quality control, and storage stability
Confirm identity with ¹H NMR (aldehyde proton near 10 ppm) and IR (C=O near 1700 cm⁻¹), and confirm purity by reversed-phase HPLC with UV detection near 254 nm. The most common impurity is the matching nitrobenzoic acid.
How do you read the NMR and IR spectra?
In CDCl₃, the aldehyde proton appears as a singlet at roughly δ 10.1–10.4. The 4-isomer shows a tidy pair of doublets near δ 8.4 and 8.1, reflecting its symmetry, while the 2- and 3-isomers give more complex four-proton patterns. In the IR spectrum, look for the aldehyde C–H doublet near 2850 and 2750 cm⁻¹, the conjugated C=O near 1700 cm⁻¹, and NO₂ stretches near 1525 and 1350 cm⁻¹. Values are approximate, so compare against reference spectra such as those in the AIST SDBS database.
| Test | Method | What it tells you |
|---|---|---|
| Appearance | Visual | Color shift suggests oxidation or photodegradation |
| Assay | HPLC-UV, 254 nm | Purity (98% versus 99%+ grade) |
| Identity | ¹H NMR, IR, melting range | Correct isomer, no regioisomer contamination |
| Acid impurity | HPLC or titration | Nitrobenzoic acid from autoxidation |
| Water content | Karl Fischer | Moisture affecting stability and stoichiometry |
How should you test purity and store the material?
A C18 column with a water–acetonitrile gradient and 254 nm detection resolves the aldehyde from its acid and isomeric impurities. Typical commercial grades are 98% and 99% or higher by HPLC, and impurity limits are normally set in the supplier specification or your own internal standard. For storage, use a tightly sealed amber container in a cool, dry, dark place, ideally under nitrogen for long-term holding. Air and light slowly oxidize the aldehyde to nitrobenzoic acid, and a deepening yellow or brown color is an early warning. Published shelf-life data are limited, so rely on the supplier's retest date and re-assay before critical work.
How to buy nitrobenzaldehyde: grades, packaging, and 2026 supply trends
When you buy nitrobenzaldehyde, specify the CAS number, purity grade, pack size, and documentation (SDS and certificate of analysis) before the order is placed. The checklist below summarizes the main decision points for US buyers.
| Item | Typical options | What to verify |
|---|---|---|
| Purity grade | 98%, 99%, HPLC or reagent grade | CoA with HPLC assay and isomer content |
| Pack size | Gram-scale catalog packs to kilogram bulk | Container type, lot consistency |
| Price | Quote-based; varies by isomer, purity, volume | Tiered pricing and total landed cost |
| US stock and shipping | Domestic warehouse versus import | Lead time, customs, handling fees |
| Temperature | Ambient shipping typical | Insulated packaging for summer lanes |
| Documentation | SDS, CoA, specification sheet | Current GHS-format SDS |
According to Verified Market Research (updated March 2026), the global 4-nitrobenzaldehyde market was about USD 85 million in 2025, with a projected 4.8% CAGR from 2025 to 2033 reaching roughly USD 124 million; North America accounts for about 25%. Pricing for any isomer is quote-based and depends on purity and volume. Per-gram catalog prices usually fall steeply at kilogram scale, but figures change often, so request current quotes rather than relying on published lists.
What purity grade should you choose?
Choose 98% for general synthesis where a recrystallization step follows, and 99% or higher HPLC grade for pharmaceutical intermediates, analytical standards, and photochemical work where isomeric and acid impurities matter. Paying for a higher grade and then degrading it through poor storage is a false economy.
How can you reduce supply risk in 2026?
Tariff changes and supply chain de-risking are pushing US buyers toward dual sourcing, with qualified suppliers in India and domestic production capacity as alternatives. Request lot-specific CoAs and confirm US warehouse stock versus import lead time. Multi-category fine chemical and pharmaceutical intermediate suppliers can often consolidate several raw materials in one order, but verify each supplier's documentation independently.
What shipping conditions should you expect?
Nitrobenzaldehyde typically ships at ambient temperature in sealed, light-protective containers. Still, a parcel sitting in a hot truck can soften the low-melting 2-isomer and speed degradation, so ask for insulated packaging in summer and inspect the color on arrival. Cold-chain shipping is rarely mandatory, but a cool receiving area is.
Frequently asked questions
Q: What is the melting point of nitrobenzaldehyde?
A: It depends on the isomer. Typical catalog ranges are about 42–44 °C for 2-nitrobenzaldehyde, 55–58 °C for 3-nitrobenzaldehyde, and 103–106 °C for 4-nitrobenzaldehyde. A broad or depressed range usually signals isomeric or acid impurities, so check the certificate of analysis for your lot.
Q: Is nitrobenzaldehyde soluble in water?
A: No, all three isomers are poorly soluble in water. They dissolve readily in DMSO, DMF, ethanol, acetone, and ethyl acetate. For aqueous work, prepare a concentrated stock in DMSO or ethanol first, then dilute gradually while checking for precipitation.
Q: Which nitrobenzaldehyde isomer is the most reactive?
A: 4-nitrobenzaldehyde generally has the most electrophilic carbonyl, and 3-nitrobenzaldehyde the least, with the ortho isomer in between. Actual rates depend on solvent, catalyst, and sterics, so confirm with a small pilot reaction before committing to a larger batch.
Q: How should nitrobenzaldehyde be stored?
A: Keep it in a tightly sealed amber container in a cool, dry, dark place, away from strong bases, oxidizers, and reducing agents. Inert gas helps for long-term storage. Yellowing or clumping suggests degradation, so re-assay before critical use.
Q: What is nitrobenzaldehyde used for?
A: It is mainly a synthetic intermediate for dihydropyridine pharmaceuticals, agrochemicals, dyes such as indigo, and photochemical materials such as o-nitrobenzyl protecting groups. The right isomer depends on the target structure, so confirm the CAS number before ordering.
Choosing among the nitrobenzaldehyde isomers comes down to three questions: which position does your target structure require, how pure must the material be, and can you store and handle it safely? Match the CAS number (552-89-6, 99-61-6, or 555-16-8) to your route, verify purity and the SDS, and protect the material from light, air, and heat. Do that, and nitrobenzaldehyde becomes a dependable building block rather than a source of surprises. For custom specifications or bulk requirements, contact a qualified fine chemical supplier and request current documentation.
Recommend News
undefined